Free Shipping on Orders Over $50
Modular WorkSafe Light ESD With Holes Grease, Resistant w/Snap, 1/2in Thick
- Modular 3'x3' ESD mats with interlock on 2 sides
- Use where static discharge is a concern
- Use as a single mat or configure to any space
- Safety rounded edges
- Solid style for ease of maintenance or open style for air-flow
- Grounding snap is attached to the corner of each mat
- Details & Composition
- Test Results
- Chemical Resistance
Parameters of Category: Specifications - General
|Solid or Drainage||Drainage|
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Test Specification & Results
|Property||Test / Result|
|Flammability||MVSS 302 / 'A'; Rating|
|Taber Abrasion||Not Available|
|Temperature Range||Not Available|
|Coefficient of Friction||Not Available|
|Compression Deflection||Not Available|
|Tear Strength||Not Available|
|ESD Rating||EOS/ESD S7.1: RTT= 1 x 10^6 to 1 x 10^10|
|Dielectric Strength||Not Available|
- A = Performs well
- B = Slightly affected
- C = Moderately affected
- D = Highly affected
- U = Not recommended
- NT = Not tested
|Bleach Solution (10% Dilute)||NT||B||B||C||C||C|
|Brake Fluid (Silicone Based)||U||A||B||A||B||B|
|Chlorine Solution (3% Dilute)||C||A||B||C||C||C|
|Cutting Fluid (Mineral Oil Based)||U||B||B||B||C||D|
|Hydraulic Oil (Petroleum)||U||A||B||D||D||D|
|Hydrochloric Acid Cole (37% Dilute)||U||C||C||B||B||B|
|Lindol (Hydraulic Fluid)||NT||U||NT||U||U||U|
|Transmission Fluid (Type A)||U||B||A||C||U||U|
Write a Review
Q: Do I need conductive or Static Dissipative flooring?
A: From a technical point of view, the answer is to confirm the OHM rating required by your application, then choose the product that meets your required OHM rating. Conductive products have a lower OHM rating. That means that there is less resistance and therefore, conductive products will allow static electricity to ground out faster than a static dissipative product, which has a higher OHM rating, and therefore higher resistance.
Q: What does the OHM rating tell me?
A: An OHM is a unit of measure that defines electrical resistance between two points.The lower the OHM reading the lower the resistance to electricity passing through and therefore the faster electricity can pass through to ground.There is a specific range of OHM ratings that define the difference between a conductive product and a static dissipative product. Choose the product which has an OHM rating that meets the requirements of your application.
Q: What is ESD?
A: ESD (Electrostatic discharge) is the sudden flow of electricity between two electrically charged objects caused by contact. ESD is the cause for that annoying "zap" you get when you reach for a metal door handle. Your body and clothing accumulate static electricity. That static electricity desperately wants to reach a ground point. ESD matting and flooring is intended to prevent unintentional discharges of static electricity by creating a path to ground through your body and out through the mat or floor for static electricity that is accumulated in your body and clothing.
Q: Do I still need heel grounding straps?
A: To allow the flow of electricity to reach a ground source, a heel strap must be worn if the operator is wearing non-conductive soled shoes.
Q: Are the colors shown on your website the exact color I should expect to receive?
A: No, because monitors vary so there may be a slight variance in the color. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.