Click to zoom Tile-Top ANTI-MICROBIAL,SpongeCote Beveled, 1/2in Thick

More Views

Tile-Top ANTI-MICROBIAL,SpongeCote Beveled, 1/2in Thick

Anti-Microbial (AM) top to bottom. The AM Nitrile rubber composite sponge offers maximum comfort and resilience while the AM surface delivers additional abrasion and chemical resistance.

  • Premium Anti-Microbial sponge
  • Non-porous, Anti-Microbial surface
  • 2X the resilience and 3X the life of look-alikes
  • Maximized standing area
  • Lay-flat design

$0.00
  • Details & Composition
  • Test Results
  • Chemical Resistance
  • Literature
  • Reviews
  • FAQs
Parameters of Category: Specifications - General
Environment Dry
Type Anti-Fatigue Matting
Customization Level
Solid or Drainage Solid
Compound PVC/nitrile infused sponge
Recycled <10%
Warranty Lifetime
WARNING

Warning Symbol WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Test Specification & Results
Property Test / Result
Flammability MVSS 302 / 'A'; Rating
Taber Abrasion Federal Standard 191 / 1000g, CS-17 wheel
Temperature Range 0 to 110 F
Coefficient of Friction ASTM F1677 / Dry: COF = .78
Compression Deflection Not Available
Tear Strength Not Available
ESD Rating Not Available
Dielectric Strength Not Available

Key

  • A = Performs well
  •  B = Slightly affected
  •  C = Moderately affected
  • D = Highly affected
  •  U = Not recommended
  •  NT = Not tested
ChemicalUrethaneNitrilePVCCFRSBRNatural Rubber
Acetone U U U C C C
Animal Fats NT A C U U U
Bleach Solution (10% Dilute) NT B B C C C
Boric Acid B A A A A A
Brake Fluid U A B D D D
Brake Fluid (Silicone Based) U A B A B B
Chlorine Solution (3% Dilute) C A B C C C
Citric Acid NT A C C C U
Cutting Fluid (Mineral Oil Based) U B B B C D
Diesel Oil U A B U U U
Ethylene Acetate NT U NT U U U
Ethylene Glycol B A A A A A
Hydraulic Oil (Petroleum) U A B D D D
Hydrochloric Acid Cole (37% Dilute) U C C B B B
Isopropyl Alcohol A B A B B A
Lacquer Solvents U U U U U U
Lindol (Hydraulic Fluid) NT U NT U U U
MEK U U U U U U
Mineral Oil C A B A B U
Naptha NT C U U U U
Napthlene U U U U U U
Petroleum U C B D D D
Salt Water A A B B B C
Tolulene U U U U U U
Transmission Fluid (Type A) U B A C U U
Trichloroethane U U U U U U
Vegetable Oil C A B C C C

Write a Review

You're reviewing: Tile-Top ANTI-MICROBIAL,SpongeCote Beveled, 1/2in Thick

*Required Field


Q: What are the benefits of using anti-fatigue floor mats?

A: Anti-fatigue mats are designed to offer a wide range of benefits to employees and employers. Anti-Fatigue floor mats can increase worker productivity, reduce slips, trips and falls and improve the overall health of your employees.


Q: How do anti-fatigue mats improve overall health of my employees?

A: Standing long-term, especially on hard, unforgiving concrete leads to lower back pain, swelling of joints and poor circulation that can lead to varicose veins. Standing on anti-fatigue matting allows for continuous muscle movement which leads to increased blood flow to the legs, feet and back. Continuous blood circulation reduces fatigue, alleviates back pain and reduces swelling.


Q: How do anti-fatigue mats increase employee productivity?

A: Fatigue eventually leads to lack of focus and concentration on the task at hand. Anti-fatigue mats reduce worker fatigue allowing them to remain focused on the job at hand.


Q: How long will a Tile-Top™ Mat last?

A: The life expectancy of Wearwell Tile-Top™ mats will vary based on several factors: the number of shifts per day, the amount of foot traffic and the environment it is being used in. Under typical working conditions and customer buying history this product typically lasts about 3-5 years. You may experience different results depending on your specific application. We’d be happy to conduct a FREE Site Survey! to help you choose the product that best suits your specific needs.


Q: Can Tile-Top™ mats be exposed to liquids?

A: Tile-Top mats were designed to be placed in dry work centers or work centers with minimal overspray. The sponge on the underside of your mat can absorb fluids it comes in contact with causing the mat to wear out prematurely.


Q: How do I clean my Tile-Top™ mat?

A: Sweep regularly or dry-mop the surface. These mats can be wet-mopped with mild soap or detergent. For best results, use a detergent with a pH between 4 and 9.


Q: What is the best-selling color of Tile-Top™ Matting?

A: We offer a variety of colors of Tile-Top matting. Our best-selling color is Black.


Q: Can I cut or modify my mat?

A: We do not recommend that you cut or modify your mat in any way. In fact, cutting the mat yourself will void the warranty. We offer our Tile-Top matting in 1ft cut lengths so you can order any length of matting that you need. We also customize matting if you require a unique shape or configuration.


Q: There 2 sides to my mat. Which side do I stand on?

A: The top side of the mat is the side with the marbled surface pattern. The Sponge side of the mat touches the floor.


Q: I just took my mat out of the box and laid it on the floor and the edges aren't lying flat.

A: Please allow the mat to acclimate to the environment for 24-48 hours. Once it has acclimated the edges will lay flat.


Q: Can you customize a mat to my specific requirements?

A: Yes we can. We offer 3 types of customization:

  • C1- Custom lengths
  • C2- Custom lengths and widths
  • C3- Fully custom (size & shape)

  • The level of customization by product is on the details tab at the bottom of every product page.


    Q: Are the colors shown on your website the exact color I should expect to receive?

    A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.


    Q: Do your Tile-Top™ mats pose a tripping hazard?

    A: All of our Tile-Top mats are machined beveled (sloped edge) on all four sides. This allows for a smooth transition on and off the mat and do not pose a tripping hazard.


    Q: Why is the sponge on my Tile-Top™ mat green?

    A: Tile-Top matting was designed for labs, pharmacies, biotechnology and pharmaceutical manufacturing. The green sponge indicates that it is anti-microbial.