Free Shipping on Orders Over $50
Industrial WorkSafe Nitrile,Black/Yellow Borders, 5/8in Thick
- Bright, built-in safety borders.
- Long-term comfort and value
- Details & Composition
- Test Results
- Chemical Resistance
Parameters of Category: Specifications - General
|Solid or Drainage||Drainage|
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Test Specification & Results
|Property||Test / Result|
|Flammability||MVSS 302 / 'A'; Rating|
|Taber Abrasion||Federal Standard 191 Modified / 1% loss|
|Temperature Range||10 to 140 F|
|Coefficient of Friction||ASTM F1677 / Dry: COF = .78 / Wet COF = .68|
|Compression Deflection||Not Available|
|Tear Strength||Not Available|
|ESD Rating||Not Available|
|Dielectric Strength||Not Available|
- A = Performs well
- B = Slightly affected
- C = Moderately affected
- D = Highly affected
- U = Not recommended
- NT = Not tested
|Bleach Solution (10% Dilute)||NT||B||B||C||C||C|
|Brake Fluid (Silicone Based)||U||A||B||A||B||B|
|Chlorine Solution (3% Dilute)||C||A||B||C||C||C|
|Cutting Fluid (Mineral Oil Based)||U||B||B||B||C||D|
|Hydraulic Oil (Petroleum)||U||A||B||D||D||D|
|Hydrochloric Acid Cole (37% Dilute)||U||C||C||B||B||B|
|Lindol (Hydraulic Fluid)||NT||U||NT||U||U||U|
|Transmission Fluid (Type A)||U||B||A||C||U||U|
Write a Review
Q: What does NBR stand for?
A: NBR stands NBR stands for Nitrile Rubber.
Q: What types of fluids is the NBR compound resistant to?
A: The NBR compound is resistant to silicone-based brake fluid, boric acid, ethylene glycol, animal fats, brake fluid, chlorine solution, diesel oil, petroleum-based hydraulic oil, salt water and vegetable oil.
Q: What does GR stand for?
A: GR stands for Grease Resistant.
Q: What types of fluids is the GR compound suited for?
A: The GR compound is best suited for areas with water and dry debris. It is also resistant to boric acid & ethylene glycol.
Q: Is there edging available?
A: Yes. All Industrial Worksafe Mats include a molded-in safety border. The GR compound is available with black or orange borders. The NBR compound is available with black, yellow or orange borders.
Q: Can Industrial Worksafe be exposed to liquids?
A: Yes, Industrial Worksafe can be placed in both wet and dry environments.
Q: How do I clean my Industrial Worksafe mat?
A: Use a high-pressure hose (not to exceed 500 psi) and hot water (max 160o F) to rid the mats of oils. For best results use a mild soap or detergent with a pH between 4 and 9, to clean the mats. Do not use steam (unless specifically recommended), degreasers, or caustic chemicals. Do not machine wash or mechanically scrub the mats.
Q: There 2 sides to my mat. Which side do I stand on?
A: The ramps on the top side of the mat are ribbed.
Q: Are the colors shown on your website the exact color I should expect to receive?
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
Q: Do Industrial Worksafe mats pose a tripping hazard?
A: Industrial Worksafe mats have molded-in safety borders (sloped edge) on all four sides. This allows for a smooth transition on and off the mat and do not pose a tripping hazard.
Q: Do your rubber mats smell?
A: Yes! Unfortunately, that rubbery smell is a feature of any rubber product. The mat should lose that smell over time. If you are planning to install rubber mats or flooring in any enclosed space, please remember that this can slow the dissipation of a strong rubber scent.