24/Seven w/Grit Shield Open Grid Nitrile Rubber Black,5/8in x 3ft x 3ft
- Ability to replace single tiles saves money and down time
- Hidden interlocks
- Available in 2 different rubber compounds
Standard size are not available for this product.
|Environment||Wet, Oily, Slippery|
|Customization Level||C3 - Full Custom (Length, Width, Shape)|
|Solid or Drainage||Drainage|
|Compound||Grease Proof Nitrile Rubber|
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
|Property||Test / Result|
|Flammability||MVSS 302 / 'A'; Rating|
|Taber Abrasion||Federal Standard 191 Modified / 1% loss|
|Temperature Range||10 to 140 F|
|Coefficient of Friction||ASTM F1677 / Dry: COF = 1.10 / Wet COF = .90|
|Compression Deflection||ASTM D 575 / Deflection @35 psi|
|Tear Strength||Not Available|
|ESD Rating||Not Available|
|Dielectric Strength||Not Available|
|Bleach Solution (10% Dilute)||NT||B||B||C||C||C|
|Brake Fluid (Silicone Based)||U||A||B||A||B||B|
|Chlorine Solution (3% Dilute)||C||A||B||C||C||C|
|Cutting Fluid (Mineral Oil Based)||U||B||B||B||C||D|
|Hydraulic Oil (Petroleum)||U||A||B||D||D||D|
|Hydrochloric Acid Cole (37% Dilute)||U||C||C||B||B||B|
|Lindol (Hydraulic Fluid)||NT||U||NT||U||U||U|
|Transmission Fluid (Type A)||U||B||A||C||U||U|
A: GR stands for Grease Resistant.
A: The GR compound is best suited for areas with water and dry debris. It is also resistant to boric acid & ethylene glycol.
A: CFR stands for Cutting Fluid Resistant.
A: The CFR compound is resistant to mineral oil-based fluids. It is also resistant to silicone-based brake fluid, boric acid & ethylene glycol.
A: NBR stands for Nitrile Rubber.
A: The NBR compound is resistant to silicone-based brake fluid, boric acid, ethylene glycol, animal fats, brake fluid, chlorine solution, diesel oil, petroleum-based hydraulic oil, salt water and vegetable oil.
A: Yes, 3" edging is available in both yellow and black for 24/Seven. Edging comes in both male and female to correspond with the male or female side of the mat. Edging comes in 3" wide by 39" long strips.
A: GRITSHIELD is a clear particulate that is added to the surface as a secondary process. GRITSHIELD increases the traction by about 30% in wet environments.
A: Yes, 24/Seven mats can be placed in both wet and dry environments.
A: Sweep the surface regularly.
A: Yes we can. We offer 3 types of customization:
A: No, because monitors vary so there may be a slight variance in the color. If color choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, color can vary, but our products fall within an industry-standard acceptable variation.
A: 24/Seven mats are available with 3" edging in yellow and black. The ramps allow for a smooth transition on and off the mat and do not pose a tripping hazard.
A: Yes! Unfortunately, that rubbery smell is a feature of any rubber product. The mat should lose that smell over time. If you are planning to install rubber mats or flooring in any enclosed space, please remember that this can slow the dissipation of a strong rubber scent.