• Comfortable sponge base
• NFSI Certified
• Custom fit to any station or booth
• Easy to install, universal ramps
• Overall thickness 7/8” (22 mm)
• U.S. PATENT NO. 10,914,081; 11,174,648; D502,557; D520,650; 11,454,037

Learn more about welding matting and flooring solutions here.

• Tiles interlock securely and come apart on demand for reconfiguration
• EOS/ESD S7.1: 1x10^6-1x10^9 (meets ANSI/ESD 20.20 requirements)
• Cover large areas with ESD dissipative ergonomic flooring in minutes
• Grease resistant rubber best in lightly wet and slippery dry areas
• Grounding snap on each mat
• 3’x 3’(91x91cm) rubber tiles
• Overall thickness 1" (25.4 mm)
• Reduced stress on feet, joints, back, and muscles
• Improves circulation and boosts worker morale
• Improves worker productivity and endurance
• Easy to clean and maintain
• U.S. PATENT NO. 10,914,081; 11,174,648; 11,454,037
• Safety ramps do not posses ESD properties

• NFSI (National Floor Safety Institute) Certified
• Nitrile infused sponge base
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Maximized standing area
• Overall thickness 15/16”
• Also available in black
• Available in standard workstation sizes and 1' increment lengths.

• 19.63 inch x 36 inch (49 cm x 91 cm)
• 2.25 inch (5.7 cm) height
• Holds up to 1.5 inch (3.8 cm) maximum cable diameter
• Medium Duty Cable and Hose Protector Ramps Support a maximum of 10,000 lbs per axle
• Black with Safety Yellow Lid
• Works as a traffic speed bump that protects hoses/cables crossing driveways
• Covered by a 3-year indoor and 1-year outdoor warranty

• Made of grease resistant natural rubber with anti-slip properties
• Design your floor mat with or without bright, safety borders
• Long-term comfort and anti-fatigue benefits for standing workers
• WorkSafe floor mats are configurable to suit your workspace and floorplan
• Connect 18"x24" and 18"x48" floor mat sizes in all four directions with WorkSafe Connector Strips
• Superior chemical resistance
• Easy to clean (not to exceed 500 psi hot water max 160 F)
• Wet or dry work environments
• Use over grated floors, cat walks
• Our thickest 7/8" durable construction

Learn more about WorkSafe flooring and matting solutions here.

• Structural Aluminum Frame
• 100% Recycled (Post-Consumer) Polypropylene Tiles
• Elevates Employees over Cords, Hoses, Plumbing and other Hazards
• Protects route cords and hoses
• Prevents trips and falls
• Chemical and abrasion resistant
• 400 lb. (181.5kg) load capacity per tile
• Patented by Wearwell (US 11,808,046 B2)

• Smooth Surface
• Unmatched Comfort, Support, and Durability
• Easy to clean
• molded in no-trip bevels
• Meets the ASTM G21 standard for anti-microbial properties
• 3/4" Polyurethane
• Made in the USA

• Fill the sanitizing foot mat with disinfectant solution to remove contaminants and germs
• Pliable 1/2" rubber scrapers dislodge contaminants from soles of shoes and boots
• Comes in your choice of yellow or black border walls
• For best decontamination, shoe soles must be immersed for one minute

View our full line of contamination control floor mats here.

• Resists microbial growth (ASTM G21)
• Reversible

• High-heat spark resistant rubber surface - silicone free
• Nitrile blend anti-fatigue sponge for ergonomic support
• Ideal for welding areas, workstations, welding pads
• Ignition point of over 500 degrees F
• National Floor Safety Institute Certified
• Flammability: MVSS 302: “A” Rating
• Made in the USA
• Available in 7/8 and 9/16in thickness
• #1 Wearwell Brand since 1950

Learn more about Welding Mats in our blog - Best Welding Mats - 6 Things to Consider.

• Conforms to ANSI/ASTM D-178-01 Type II, Class 2 standards
• Dielectric Strength: 30,000 volts
• Recommended Max Usage per ASTM D178-01: up to 17,000 volts
• Easy to clean Diamond-Plate traction surface design adds safety
• Frequently used in mining, utility and other heavy-industry facilities
• Made in USA

• Nitrile enhanced sponge base
• NFSI Certified
• Solves the puzzle of your space challenge
• Tough abrasion and chemical resistant PVC surface
• Slightly textured, easy-to-clean surface
• Compatible with other ErgoDeck Styles
• Overall thickness 7/8
• U.S. PATENT NO. 10,914,081; 11,174,648; D502,557; D520,650

Learn more about the different versions of ErgoDeck in our blog - ErgoDeck Ergonomic Interlocking Floor Tiles – Which Version Should I Choose?