H.T. Runner for Welding - High Temperature High Traffic Flooring Rolls

Group
ML347
Starting At $1,630.84

The H.T. (High Temperature/High Traffic) Runner is the perfect solution for high temperature and high foot traffic areas where heat resistance is important and anti-fatigue properties are not the primary objective. Install for aisle ways in facilities with high temperature equipment and operations or transportation vehicles where a heat resistant floor surfaces are needed. Available in 75 foot flooring rolls. Durable 3/16th inch material can be cut-to-fit.

  • Ignition point of over 500 degrees Fahrenheit (200 degrees Celsius) designed for welding settings
  • Excellent choice for long aisle ways in facilities with high temperature equipment and operations
  • Stands up to high foot traffic
  • Tough natural rubber walking surface
  • 3/16" (5 mm) thick
  • Cut to fit - Available in 75 foot lengths - floor mat rolls

+ Read More
Have a question? We're here to help!
Putting Together Wearwell Part Numbers
See an example of how Wearwell puts together their part numbers.

Standard size are not available for this product.

Parameters of Category: Specifications - General
EnvironmentDry
TypeRunner
Customization LevelC1- Custom Length
Solid or DrainageSolid
CompoundNatural Rubber Surface
Recycled>20%
Warranty1 Years
WARNING
Test Specification & Results
PropertyTest / Result
Flammability MVSS 302 / 'A'; Rating.
Taber Abrasion Federal Standard 191 / 1% lost @ 1,000 cycles
Temperature Range 500 F Melt Point
Coefficient of Friction ASTM F1677 / Dry: COF = 1.10 / Wet COF = .32
Compression Deflection ASTM D575 / Deflection @ 35 psi
Tear Strength Not Available
ESD Rating Not Available
Dielectric Strength Not Available

Key

  • A = Performs well
  • B = Slightly affected
  • C = Moderately affected
  • D = Highly affected
  • U = Not recommended
  • NT = Not tested
Chemical Urethane Nitrile PVC CFR SBR Natural Rubber
Acetone U U U C C C
Animal Fats NT A C U U U
Bleach Solution (10% Dilute) NT B B C C C
Boric Acid B A A A A A
Brake Fluid U A B D D D
Brake Fluid (Silicone Based) U A B A B B
Chlorine Solution (3% Dilute) C A B C C C
Citric Acid NT A C C C U
Cutting Fluid (Mineral Oil Based) U B B B C D
Diesel Oil U A B U U U
Ethylene Acetate NT U NT U U U
Ethylene Glycol B A A A A A
Hydraulic Oil (Petroleum) U A B D D D
Hydrochloric Acid Cole (37% Dilute) U C C B B B
Isopropyl Alcohol A B A B B A
Lacquer Solvents U U U U U U
Lindol (Hydraulic Fluid) NT U NT U U U
MEK U U U U U U
Mineral Oil C A B A B U
Naptha NT C U U U U
Napthlene U U U U U U
Petroleum U C B D D D
Salt Water A A B B B C
Tolulene U U U U U U
Transmission Fluid (Type A) U B A C U U
Trichloroethane U U U U U U
Vegetable Oil C A B C C C
Write Your Own Review
You're reviewing:H.T. Runner for Welding - High Temperature High Traffic Flooring Rolls
Your Rating

Q: Can I glue the 347 runner to the floor?

A:Yes, you can! Semi-permanent installations can be accomplished with common mastics. Please contact your local home improvement store for the best adhesive recommendation for rubber to whatever type of substrate you're adhering to. (i.e. concrete, wood, steel, etc.)


Q: If I purchase a full roll, will I be able to cut it to the lengths that I need?

A:Yes, you can! It's very easy to cut this material to size. All you need is a straight edge and a pair of shears or utility knife. Safety first! Always wear cut resistant gloves when cutting.


Q: What's the life expected life of this product?

A:The life expectancy can vary dramatically depending on a multitude of factors such as: foot traffic, exposure to oils, caustic chemicals or fluids, excessive temperatures, cleaning and maintenance schedule, compound, etc. The following are general guidelines based on our customers’ experience (your experience may vary): Average lifespan is 1 - 2 years.