• Available in 1/4” thickness in cut lengths to 75ft long
• 1/4” thickness conforms to ANSI/ASTM D178-01, Type II, Class 2: 30,000 volts. (Recommended Max Usage up to 17,000 volts)
• Available in black only: 3/8” thickness conforms to ANSI/ASTM D178-01, Type II, Class 3: 40,000 volts. (Recommended Max Usage up to 26,500 volts)
• Easy to clean corrugated or "ribbed" surface design adds traction and safety
• USA Made

• NFSI (National Floor Safety Institute) Certified
• Nitrile infused sponge base
• Unique polymer finish is permanently tacky to keep mats in place
• Tough abrasion and chemical resistant PVC surface
• Machine cut, pre-beveled edges prevent tripping
• Overall thickness 9/16”
• Also available in black
• Available in standard workstation sizes and 1' increment lengths.

• 19.63 inch x 36 inch (49 cm x 91 cm)
• 3 inch (7.5 cm) height
• Holds up to 2.25 inch (5.7 cm) maximum cable diameter
• Speed bump cable protector supports a maximum of 14,000 lbs per tire
• Available 4 turning pieces / sections for 90 degree turns with size of 31.23" x 31.25" (.78mx.78m)
• Black base with Safety Yellow Lid
• Covered by a 3 year indoor and 1 year outdoor warranty
• #1 Wearwell Brand

Note: For a fully protected 90 degree turn, 4 turn sections are required

• Structural Aluminum Frame
• 100% Recycled (Post-Consumer) Polypropylene Tiles
• Elevates Employees over Cords, Hoses, Plumbing and other Hazards
• Superior slip resistance
• Chemical, oil and fat resistant
• 400 lb. (181.5kg) load capacity per tile
• Patented by Wearwell (US 11,808,046 B2)

• Conforms to ANSI/ASTM D178 01, Type II, Class 2
• Insulates up to 40,000 volts of electricity
• "Best" Nitricell sponge base delivers 2X the resilience and 3X the life of typical sponges
• 5/8" thick, 3' wide
• Meant for use in dry, indoor areas
• Lay-flat design and up to 20% more standing area compared to off brand products
• Made in USA

• Reversible outdoor mat to accommodate all weather conditions
• Size is 3' x 6' (.91m x 1.82m)
• Flexible scrapers and quick-dry drainage ports to remove debris and moisture
• Stiff ridges scrape heavier debris and packed snow

View our full line of contamination control floor mats here.

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 1/2”
• Other colors available in gray, charcoal, and blue
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• Effectively traps impurities from shoe soles for dirt and dust control
• Each mat has 30 numbered layers of tough dirt removing film
• Easy to use- pull off and discard
• Cases include 120 or 240 sheets - can last an entire project
• Use on low-pile carpet, tile, concrete, hard flat surfaces

• Structural Aluminum Frame
• 100% Recycled (Post-Consumer) Polypropylene Tiles
• Elevates Employees over Cords, Hoses, Plumbing and other Hazards
• Chemical and corrosion resistant
• 400 lb. (181.5kg) load capacity per tile
• Widths: 18" and 36" (46 cm and 91 cm)
• Lengths: 18", 36", 54", 72" (46 cm, 91 cm, 137 cm, 183 cm)
• Stocked Heights: 4", 8" and 12" (10 cm, 20 cm, 30 cm)
• Patented by Wearwell (US 11,808,046 B2)

Learn more about our full list of FOUNDATION work platform kits and accessories here.

• Nitrile enhanced sponge base
• NFSI Certified
• Modular to fit any space
• Tough abrasion and chemical resistant surface
• Compatible with any ErgoDeck tiles
• Overall thickness 7/8
• U.S. PATENT NO. 10,914,081; 11,174,648; D502,557; D520,650; 11,454,037

Learn more about the different versions of ErgoDeck in our blog - ErgoDeck Ergonomic Interlocking Floor Tiles – Which Version Should I Choose?

• NFSI Certified
• Abrasion resistant
• 2X the resilience and 3X the life of look-alikes
• Maximized standing area
• Ultra 15/16in thickness with beveled edge
• Unique pre-bond bevel and lay-flat design prevent trip hazards

• Formulated high-temp rubber
• Ignition point of over 500⁰ Fahrenheit (200⁰ Celsius) designed for welding settings
• Resist pitting and damage from slag and splatter
• Excellent choice for long aisle ways in facilities with high temperature equipment and operations
• Stands up to high foot traffic
• 5/64" thick

Learn more about Welding Mats in our blog - Best Welding Mats - 6 Things to Consider.