• Available in 1/4” thickness in cut lengths to 75ft long
• 1/4” thickness conforms to ANSI/ASTM D178-01, Type II, Class 2: 30,000 volts. (Recommended Max Usage up to 17,000 volts)
• Available in black only: 3/8” thickness conforms to ANSI/ASTM D178-01, Type II, Class 3: 40,000 volts. (Recommended Max Usage up to 26,500 volts)
• Easy to clean corrugated or "ribbed" surface design adds traction and safety
• USA Made

• U.S. PATENT NO. D653,893
• Meets the ASTM G21 standard for anti-microbial properties
• Configure large anti-fatigue flooring quickly
• Modular tiles hold secure, hidden interlocks
• Tiles are 100% Urethane with thick outer wear layer
• Ramps are 100% SBR Rubber
• Exceptional comfort and long-lasting performance
• 5/8in Overall Thickness

Learn more about Rejuvenator flooring and matting here.

• Cutting Fluid Resistant Rubber (CFR)
• Wet or oily work environments
• Lightweight
• High Performance
• Overall thickness 1/2" (16mm)
• Gray

Learn more about WorkSafe flooring and matting solutions here.

• 19.63 inch x 36 inch (49 cm x 91 cm)
• 3 inch (7.5 cm) height
• Holds up to 2.25 inch (5.7 cm) maximum cable diameter
• Speed bump cable protector supports a maximum of 14,000 lbs per tire
• Available 4 turning pieces / sections for 90 degree turns with size of 31.23" x 31.25" (.78mx.78m)
• Black base with Safety Yellow Lid
• Covered by a 3 year indoor and 1 year outdoor warranty
• #1 Wearwell Brand

Note: For a fully protected 90 degree turn, 4 turn sections are required

• Conforms to ANSI/ASTM D-178-01 Type II, Class 2
• Dielectric Strength: 30,000 volts
• Available in 1/4” and 3/8" thickness
• Easy to clean Corrugated surface design adds traction and safety
• 1/4” thickness conforms to ANSI/ASTM D178-01, Type II, Class 2: 30,000 volts. (Recommended Max Usage up to 17,000 volts)
• 3/8” thickness conforms to ANSI/ASTM D178-01, Type II, Class 3: 40,000 volts. (Recommended Max Usage up to 26,500 volts)
• Cut to length - 1’ incremental cut lengths are available for 1/4" thickness
• Only full rolls, 75ft, available for 3/8" thickness

• Nitrile enhanced sponge base
• NFSI Certified
• Modular to fit any space
• Tough abrasion and chemical resistant surface
• Compatible with any ErgoDeck tiles
• Overall thickness 7/8
• U.S. PATENT NO. 10,914,081; 11,174,648; D502,557; D520,650; 11,454,037

Learn more about the different versions of ErgoDeck in our blog - ErgoDeck Ergonomic Interlocking Floor Tiles – Which Version Should I Choose?

• GR - Grease Resistant Natural Rubber
• Beveled built-in safety borders.
• Long-term comfort and value
• Overall thickness 5/8

• Treated surface drains static electricity from personnel
• 5/32in Overall Thickness
• Protect sensitive equipment from damage or eliminate static annoyance
• Grounding snap is attached to the corner of each mat (NOTE: Mat must be grounded with a ground cord; workers must wear Heel Grounder or shoes with conductive soles)

• Reversible outdoor mat to accommodate all weather conditions
• Size is 3' x 6' (.91m x 1.82m)
• Flexible scrapers and quick-dry drainage ports to remove debris and moisture
• Stiff ridges scrape heavier debris and packed snow

View our full line of contamination control floor mats here.

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 1/2”
• Other colors available in gray, charcoal, and blue
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• Effectively traps impurities from shoe soles for dirt and dust control
• Each mat has 30 numbered layers of tough dirt removing film
• Easy to use- pull off and discard
• Cases include 120 or 240 sheets - can last an entire project
• Use on low-pile carpet, tile, concrete, hard flat surfaces

• U.S. PATENT NO. D502,557; D520,650
• Lightly textured surface is ideal for push carts and pivoting
• Customize in 3" (8 cm) increments to fit any area or configuration
• Weight capacity PSI 75

Learn more about the different versions of ErgoDeck in our blog - ErgoDeck Ergonomic Interlocking Floor Tiles – Which Version Should I Choose?