• Available in 1/4” thickness in cut lengths to 75ft long
• 1/4” thickness conforms to ANSI/ASTM D178-01, Type II, Class 2: 30,000 volts. (Recommended Max Usage up to 17,000 volts)
• Available in black only: 3/8” thickness conforms to ANSI/ASTM D178-01, Type II, Class 3: 40,000 volts. (Recommended Max Usage up to 26,500 volts)
• Easy to clean corrugated or "ribbed" surface design adds traction and safety
• USA Made

• NFSI Certified
• Wearwell Nitricell sponge base
• 15/16” overall thickness
• Abrasion resistant
• Maximized standing area
• Also available in black, black w/ yellow borders and black w/ chevron borders

• 19.63 inch x 36 inch (49 cm x 91 cm)
• 2.25 inch (5.7 cm) height
• Holds up to 1.5 inch (3.8 cm) maximum cable diameter
• Supports a maximum of 10,000 lbs per tire
• Black with Yellow Lid
• Covered by a 3 year indoor/1 year outdoor warranty

• Resists microbial growth (ASTM G21)
• Reversible

• Ideal for outdoor entrances
• Made from natural durable rubber compound - resists harsh elements
• Pliable ridges and scraper-tips on side walls remove debris dirt, grass, snow, salt etc. before it enters the building.
• Flexible scrapers have quick-dry design
• Mat can be bolted down for a permanent application
• Use as a portable entrance mat for workers who toil in muddy areas
• Made for easy cleaning and low maintenance
• Green rating is greater than 33 percent post industrial material
• 2 3/16in x 12 3/8in x 15 1/4in
• #1 Wearwell Brand

View our full line of contamination control floor mats here.

• Conforms to ANSI/ASTM D-178-01 Type II, Class 2
• Dielectric Strength: 30,000 volts
• Available in 1/4” and 3/8" thickness
• Easy to clean Corrugated surface design adds traction and safety
• 1/4” thickness conforms to ANSI/ASTM D178-01, Type II, Class 2: 30,000 volts. (Recommended Max Usage up to 17,000 volts)
• 3/8” thickness conforms to ANSI/ASTM D178-01, Type II, Class 3: 40,000 volts. (Recommended Max Usage up to 26,500 volts)
• Cut to length - 1’ incremental cut lengths are available for 1/4" thickness
• Only full rolls, 75ft, available for 3/8" thickness

• GR - Grease Resistant Natural Rubber
• Beveled built-in safety borders.
• Long-term comfort and value
• Overall thickness 5/8

• Reversible outdoor mat to accommodate all weather conditions
• Size is 3' x 6' (.91m x 1.82m)
• Flexible scrapers and quick-dry drainage ports to remove debris and moisture
• Stiff ridges scrape heavier debris and packed snow

View our full line of contamination control floor mats here.

• Treated surface drains static electricity from personnel
• 5/32in Overall Thickness
• Protect sensitive equipment from damage or eliminate static annoyance
• Grounding snap is attached to the corner of each mat (NOTE: Mat must be grounded with a ground cord; workers must wear Heel Grounder or shoes with conductive soles)

• NFSI (National Floor Safety Institute) Certified
• Premium Anti-Microbial sponge
• Unique polymer finish is permanently tacky to keep mats in place
• Machine cut, pre-beveled edges prevent tripping
• Long lasting anti-fatigue performance
• Abrasion and chemical resistant surface
• Overall thickness 1/2”
• Other colors available in gray, charcoal, and blue
• Available in standard workstation sizes and 1' increment lengths.

Learn more about Tile-Top anti-fatigue matting here.

• Conforms to ANSI/ASTM D178 01, Type II, Class 2
• Insulates up to 40,000 volts of electricity
• "Best" Nitricell sponge base delivers 2X the resilience and 3X the life of typical sponges
• 5/8" thick, 3' wide
• Meant for use in dry, indoor areas
• Lay-flat design and up to 20% more standing area compared to off brand products
• Made in USA

• U.S. PATENT NO. D502,557; D520,650
• Lightly textured surface is ideal for push carts and pivoting
• Customize in 3" (8 cm) increments to fit any area or configuration
• Weight capacity PSI 75

Learn more about the different versions of ErgoDeck in our blog - ErgoDeck Ergonomic Interlocking Floor Tiles – Which Version Should I Choose?